Bevel pinion and gear kit 459/10234, aftermarket

459/10234

Brand
HATVE HTV
Article
459/10234
Machine system
Transmission
Part type
Bevel pinion and gear kit
Machine brand
JCB
Manufacturing type
Aftermarket
Compatibility
JCB 506-36
All the features

In stock

0,00 ₺

We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.

Check the exact specifications and compatibility with your machine with our managers.

We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.

Free delivery to the carrier of your choice, or collect your order in Istanbul.

Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Message on WhatsApp Message on Telegram Call us: +90 531 224 49 66

For the JCB Loadall telehandlers: bevel pinion and gear kit 459/10234, an aftermarket part. This kit is the pinion and gear of the transmission bevel gearbox.

Signs of crown wheel and pinion wear are a whine that changes on acceleration and deceleration, knocking under load, bright metal particles in the axle oil and broken tooth fragments. Common causes are long running with low or dirty axle oil, loss of the pinion bearing adjustment and sudden shock loads. When the set is replaced, the pinion and differential bearings, seals and shims are renewed too.

Specifications

Part number	459/10234
Production type	Aftermarket
Part type	Bevel pinion and gear kit
System / group	Transmission
Machine make	JCB

Compatibility

According to sources, 459/10234 is the pinion and gear kit of the bevel gearbox on JCB Loadall telehandlers (for example the 506-36); the product card also gives 459/10220. The catalogue also has the genuine version of this part. Other parts are in Reduction gears.

Fitting

Fitting a crown wheel and pinion is precise work needing measuring tools and should be done by an experienced workshop. Pinion depth is set with shims and backlash with the differential bearing adjustment, then the tooth contact pattern is checked with marking compound. Pinion bearing preload and pinion nut torque are set to the service manual. After assembly, fill the axle with the specified oil and check for whine and heat during the first hours.