- Article459/50520
- Machine systemTransmission
- Part typeSynchroniser
- Machine brandJCB
- Manufacturing typeAftermarket
- All the features
Transmission synchroniser 459/50520 is an aftermarket part for the JCB machines.
In a manually shifted gearbox, the synchroniser matches the speeds of the gear and shaft during a shift. Conical friction surfaces first bring the two parts to the same speed, then the sliding sleeve locks the gear to the shaft, so the gear goes in quietly and without a knock. When the friction surfaces or blocking teeth wear, shifts crunch, catch and become stiff, and if this is ignored the gears' engagement teeth are damaged too. The grooves on the synchroniser ring's cone cut through the oil film to provide friction; once they wear flat, the ring can no longer match speeds. Wear is judged by measuring the gap between the ring and the gear.
Specifications
| Part number | 459/50520 |
| Production type | Aftermarket |
| Part type | Synchroniser |
| System / group | Transmission |
| Machine make | JCB |
Compatibility
According to the product card, 459/50520 is a synchroniser. Fit is confirmed by the part number. Other parts are in Transmission.
Fitting
The synchroniser is changed with the gearbox open and the relevant shaft removed. Wet the parts with clean transmission oil, fit the rings and springs in the right order and check that the sliding sleeve moves freely. After assembly, fill the gearbox and try all the shifts at low speed.
Specifications
- Machine systemTransmission
- Part typeSynchroniser
- Machine brandJCB
- Manufacturing typeAftermarket
No questions about this product.
