- Article445/03300
- Machine systemTransmission
- Part typeSynchroniser
- Machine brandJCB
- Manufacturing typeAftermarket
- All the features
For the JCB machines: transmission synchroniser 445/03300, an aftermarket part.
The synchroniser is chosen by part number for the gearbox type and gear range. When replacing it, check the cone and engagement teeth of the matching gear, the sliding sleeve and the selector fork, since a worn fork prevents even a new synchroniser working properly. A clutch that does not fully release during shifts also overloads the synchroniser and should be checked. Synchroniser life depends heavily on how the machine is driven: shifting without force, with the clutch fully down, and changing direction only once stopped protect its surfaces. The right type of gearbox oil also matters, as the wrong oil changes the friction properties and makes shifting harder.
Specifications
| Part number | 445/03300 |
| Production type | Aftermarket |
| Part type | Synchroniser |
| System / group | Transmission |
| Machine make | JCB |
Compatibility
According to the product card, 445/03300 is a synchroniser. Fit is confirmed by the part number. Other parts are in Transmission.
Fitting
The synchroniser is changed with the gearbox open and the relevant shaft removed. Wet the parts with clean transmission oil, fit the rings and springs in the right order and check that the sliding sleeve moves freely. After assembly, fill the gearbox and try all the shifts at low speed.
Specifications
- Machine systemTransmission
- Part typeSynchroniser
- Machine brandJCB
- Manufacturing typeAftermarket
No questions about this product.
