O-ring 332/C2476 JCB, OEM

O-ring 332/C2476 is an OEM part for the JCB machines.

An O-ring is a rubber ring that seals the round joint between two parts: it sits in a groove and is squeezed on assembly, stopping oil, hydraulic fluid or fuel escaping. JCB machines use hundreds of O-ring sizes in hydraulic connections, pump and valve bodies, axles and transmissions. A hardened, flattened or cut ring causes leaks and loss of pressure.

Specifications

Compatibility

According to the product card, 332/C2476 is an O-ring; cross numbers: 0634.313.972. Fit is confirmed by the part number. The catalogue also has the aftermarket version of this part. Other parts are in Seals and oil seals.

Fitting

On assembly, clean the groove and mating face, wet the ring with the working fluid or suitable grease and seat it without twisting. Protect the ring as it passes sharp edges and threads, tighten the joint to the specified torque and check for leaks under pressure. Spare rings are stored somewhere cool and dark, away from sunlight and ozone, since rubber left in the light cracks at the surface and starts leaking soon after fitting. Before fitting, inspect the ring for cracks, cuts and moulding flash.