- BrandJF Parts
- Article826/00425
- Machine systemTransmission
- Part typePlanetary drain plug
- Machine brandJCB
- Manufacturing typeAftermarket
- All the features
For the JCB machines: planetary drain plug 826/00425, an aftermarket part. This plug is the drain plug of the planetary hub gearbox.
The plug's thread or magnet can deteriorate over time, and a damaged thread leaks, damages the casing thread and leads to oil loss. The plug is chosen by part number so its thread (for example 3/4 inch taper) and type (magnetic or plain) match the old one. The plugs on planetary gearboxes usually double as level plugs, with the oil filled to the edge of the hole with the wheel in the position the manual specifies. Keeping to the oil change interval reduces the deposit on the plug.
Specifications
| Part number | 826/00425 |
| Production type | Aftermarket |
| Part type | Planetary drain plug |
| System / group | Transmission |
| Machine make | JCB |
Compatibility
According to sources, 826/00425 is a 3/4 inch taper plug used on JCB machines such as the 2CX, 4CN, Loadall, Fastrac and Vibromax. The catalogue also has the genuine version of this part. Other parts are in Rear axle.
Fitting
Remove the plug with the oil warm and inspect the deposit on the magnet before cleaning it. The new plug's thread must be clean; tighten taper plugs to the specified torque and renew the sealing washer on parallel-thread plugs. After filling with oil, check around the plug for leaks. The plug comes new. If the thread in the axle casing is damaged, clean it with a tap; never force a plug into a damaged thread, as the casing can crack. Check the oil level with the machine on level ground.
Specifications
- Machine systemTransmission
- Part typePlanetary drain plug
- Machine brandJCB
- Manufacturing typeAftermarket
No questions about this product.
