Joint pin KBV0732 JCB JS, aftermarket

KBV0732

Brand
TMP
Article
KBV0732
Machine system
Hydraulic system
Part type
Pin
Machine brand
JCB
Manufacturing type
Aftermarket
Machine series
JS240, JS260, JS240, JS260
Outer diameter, mm
89,9
Length, mm
455
All the features

In stock

0,00 ₺

We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.

Check the exact specifications and compatibility with your machine with our managers.

We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.

Free delivery to the carrier of your choice, or collect your order in Istanbul.

Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Message on WhatsApp Message on Telegram Call us: +90 531 224 49 66

Joint pin KBV0732 is an aftermarket part for the JCB JS crawler excavators.

Pin life depends largely on greasing: bucket and dipper pins are greased daily and other joints at the maker's intervals. Pump in grease until it pushes out the old grease and dirt. A pin with a blocked grease channel runs dry and can wear out in a few days, so the grease nipples are checked regularly too.

Specifications

Part number	KBV0732
Production type	Aftermarket
Part type	Pin
System / group	Hydraulic system
Machine make	JCB
Series / model	JS240, JS260, JS240, JS260
Outer diameter	89,9 mm
Length	455 mm

Compatibility

According to the product card, KBV0732 is a pin. Machines listed on the card: JS240, JS260. Fit is confirmed by the part number. Other parts are in JCB JS series pins.

Fitting

Before the change, lower the attachment to the ground or support it securely, stop the engine and release the hydraulic pressure. Remove the locking element and drift the pin out with a suitable punch without damaging the eyes. After cleaning and checking the eye and bush, fit the new pin greased, refit the locking element and grease the joint until clean grease comes out.

Specifications

Machine system
Hydraulic system
Part type
Pin
Machine brand
JCB
Manufacturing type
Aftermarket
Machine series
JS240, JS260, JS240, JS260
Outer diameter, mm
89,9
Length, mm
455

Questions: 0

No questions about this product.

07/10/2026 28

JCB JS200–JS260 Undercarriage: Section J of Service Manual 9803/6400

Section J of JCB service manual 9803/6400 covers the undercarriage (track running gear) of the JCB JS200, JS210, JS220, JS240 and JS260 tracked excavators: the idler with track adjuster, the adjuster cylinder, the drive sprocket, and the top and bottom rollers. For each assembly it gives removal and replacement, dismantling and assembly, and a wear limit table that tells you whether a part can be built up by welding or must be renewed. The PDF has 33 pages.

07/10/2026 23

JCB JS200–JS260 Mainframe, Cab and Component Weights: Service Manual Section B

Section B of JCB service manual 9803/6400 covers the body and framework, cab and excavator end of the JCB JS200, JS210, JS220, JS240 and JS260 tracked excavators. It gives undercarriage dimensions, machine and component weights, fitted clearances and wear limits for the boom, dipper and bucket pins and bushes, the cab glazing procedure, and a description of the air conditioning with fault finding. The PDF runs to 44 pages.