OPET Fullgear CT 10W transmission oil, 18 l, aftermarket

OPET Fullgear CT 10W transmission oil, 18 l is an aftermarket product for the construction machines. The SAE 10W in the name is the oil's viscosity grade. Pack: can.

The gearbox and axle oil level is checked on level ground at the level plug or dipstick; on some transmissions it is measured with the engine idling and the oil warm. When the oil is changed, the magnetic drain plug is cleaned and the debris on it examined: fine dust is normal, while larger particles point to internal damage. The transmission filter and strainer are renewed with the oil. When the oil is changed, the unit's breather is checked as well, since a blocked breather raises the pressure of the warm oil and forces it out past the seals.

Specifications

Compatibility

According to the product card, this product is OPET Fullgear CT 10W, volume 18 l, maker's code 601216442. The oil is chosen to the class and viscosity required by the machine's operator manual. Other products are in Transmission oil.

Use

Drain the oil on level ground, preferably while warm. Clean the plugs and refit them with new seals, and fill the unit to the specified level. After a short period of work, check the level and for leaks again.