JCB HP 32 4002/1045 hydraulic oil, 1000 l, genuine

4002/1045

Brand
JCB
Article
4002/1045
Machine system
Oils and lubricants
Part type
Hydraulic oil
Manufacturing type
Original
All the features

In stock

0,00 ₺

We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.

Check the exact specifications and compatibility with your machine with our managers.

We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.

Free delivery to the carrier of your choice, or collect your order in Istanbul.

Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Message on WhatsApp Message on Telegram Call us: +90 531 224 49 66

JCB HP 32 4002/1045 hydraulic oil, 1000 l is a genuine JCB product for the construction machines. This is JCB HP 32 hydraulic oil supplied under a JCB part number; 32 is the viscosity grade. Pack: 1000 l container.

The hydraulic oil change interval is given in the operator manual in hours and is shortened on machines working with a breaker or other heavy attachments. The return and suction filters and the tank breather are replaced with the oil. After the change, run the system at low speed, move the cylinders through their full stroke several times to purge the air, and check the level again with the arms in the position the manual specifies. Cans and drums are stored on their side or under cover so that water cannot get in.

Specifications

Manufacturer	JCB
Production type	Original
Part type	Hydraulic oil
System / group	Oils and lubricants

Compatibility

According to the product card, this product is JCB HP 32 4002/1045, volume 1000 l, maker's code 4002/1045. The oil is chosen to the class and viscosity required by the machine's operator manual. Other products are in Transmission oil.

Use

Fill the oil from a clean, closed container after cleaning around the tank cap. Check the level in the sight glass with the arms in the position given in the manual, and look for leaks after starting the system.

Specifications

Machine system
Oils and lubricants
Part type
Hydraulic oil
Manufacturing type
Original

Questions: 0

No questions about this product.

Useful articles 07/10/2026 29

JCB 3CX and 4CX Hydraulic Oil: HP32 or HP46, System Capacity and Changing the Oil

For the hydraulic system of JCB 3CX and 4CX backhoe loaders, the JCB service manual recommends ISO VG32 oil — JCB Hydraulic Fluid HP32 — at air temperatures below +38 °C. The more viscous ISO VG46, JCB High Performance Hydraulic Oil, is for air temperatures above +38 °C only. Machines with Advanced EasyControl joysticks need a separate all-season HV class oil, JCB Multigrade Anti Shear. The hydraulic system holds approximately 130 litres. The oil is changed every 2000 hours and the filter at every 500-hour service.

Useful articles 07/10/2026 23

How to Check the Oil Levels on a JCB 3CX / 4CX: Hydraulics, Engine, Gearbox and Axles

On the JCB 3CX and 4CX the hydraulic oil level is checked at the sight glass on the hydraulic tank: park the machine on level ground, lower the loader shovel to the ground, close the excavator dipper, raise the boom, crowd the bucket and stop the engine; the oil should be at or above the red mark. Other units have their own rules: the gearbox level is checked on the dipstick after the engine has idled, and the axles and hubs are checked to the bottom of the filler hole. Below are step-by-step instructions, capacities and oil types from Section 3 of the JCB service manual.

JCB 3CX / 4CX 07/10/2026 26

JCB 3CX / 4CX Routine Maintenance: Service Intervals, Lubrication, Fluids and Filters

This page covers the routine maintenance section for the JCB 3CX / 4CX backhoe loader: service intervals by hour meter reading, pre-shift checks, lubrication points, fluids and capacities, and the standard procedures for each system — engine, fuel, hydraulics, transmission, axles, brakes and electrics.