- Article23634
- Machine systemOils and lubricants
- Part typeThreadlocker
- Manufacturing typeAftermarket
- Additional infoRemovable, blue, 10 ml
- All the features
For the construction machines: ReinWell RW-44 removable threadlocker, blue, 10 ml, an aftermarket product. A removable (medium-strength) threadlocker is for joints that will be taken apart later. Pack: 10 ml bottle.
For the threadlocker to work, the threads are cleaned of oil and old residue. A few drops are applied to the bolt threads where they meet the nut, and no more is needed. The joint is tightened at once, and full strength develops in the time given on the pack. Before use on plastic parts and fasteners, check that the product suits them. Keep the threadlocker bottle closed and do not decant it.
Specifications
| Production type | Aftermarket |
| Part type | Threadlocker |
| System / group | Oils and lubricants |
Compatibility
This is ReinWell RW-44, blue, 10 ml, product code 23634. The manufacturer lists it as service chemistry for various mechanisms and recommends it for small-diameter screws and nuts and for fasteners that are adjusted from time to time. «Removable» means the bolt or nut can be undone with ordinary tools after locking. Gap, cure time and temperature range are not given on the ReinWell card, so read the instructions on the bottle before use. For more heavily loaded threads that are not meant to come apart there is the red high-strength RW-43 in the same 10 ml bottle. High-strength version: ReinWell RW-43. Other products are in Sealants.
Use
Clean the threads, apply the threadlocker and tighten the joint to the specified torque. Do not load the joint while it cures.
Specifications
- Machine systemOils and lubricants
- Part typeThreadlocker
- Manufacturing typeAftermarket
- Additional infoRemovable, blue, 10 ml
No questions about this product.
