- Article23672
- Machine systemOils and lubricants
- Part typeThreadlocker
- Manufacturing typeAftermarket
- Additional infoHigh strength, 10 ml, −60 to +150 °C
- All the features
ReinWell RW-43 high-strength threadlocker, 10 ml is an aftermarket product for the construction machines. A high-strength threadlocker is for joints that are not meant to be taken apart often or that carry a large loosening force. Pack: 10 ml bottle.
A threadlocker is an anaerobic adhesive that cures in the gap between a bolt and a nut or hole when air is excluded. It stops the joint from loosening under vibration and protects the threads from corrosion. Medium-strength (usually blue) threadlockers allow the joint to be undone with hand tools, while high-strength (usually red) ones are for permanent joints and often need heat to release. The type is chosen according to whether the joint will need to be taken apart later. Keep the threadlocker bottle closed and do not decant it.
Specifications
| Production type | Aftermarket |
| Part type | Threadlocker |
| System / group | Oils and lubricants |
Compatibility
This is ReinWell RW-43, 10 ml, product code 23672. The card states that it cures in gaps of up to 0.4 mm, works from −60 to +150 °C and, once cured, resists water, gases, oils and fuel. Apply at 20–25 °C; handling strength develops in 2 hours and full strength in 24 hours at no less than 18 °C. Joints with threads larger than M20 are heated to 150–200 °C before dismantling. Store the bottle in a dry, dark place below +35 °C; shelf life is 24 months from manufacture. Other products are in Sealants.
Use
Clean the threads, apply the threadlocker and tighten the joint to the specified torque. Do not load the joint while it cures.
Specifications
- Machine systemOils and lubricants
- Part typeThreadlocker
- Manufacturing typeAftermarket
- Additional infoHigh strength, 10 ml, −60 to +150 °C
No questions about this product.
