816/60056A kingpin grease nipple, aftermarket

816/60056A

Article
816/60056A
Machine system
Oils and lubricants
Part type
Kingpin grease nipple
Manufacturing type
Aftermarket
All the features

In stock

0,00 ₺

We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.

Check the exact specifications and compatibility with your machine with our managers.

We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.

Free delivery to the carrier of your choice, or collect your order in Istanbul.

Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Message on WhatsApp Message on Telegram Call us: +90 531 224 49 66

For the construction machines: 816/60056A kingpin grease nipple, an aftermarket part. A grease nipple is the one-way valve through which grease enters the joint.

Grease nipples differ in thread (metric, BSP or UNF), body length and angle (straight, 45° or 90°). A nipple with the wrong thread damages the thread of the hole, and one with the wrong angle makes it hard to fit the grease gun coupler. The nipple is chosen by part number or by the thread and angle of the old one. When it is replaced, the hole is cleaned and the passage checked for blockage.

Specifications

Production type	Aftermarket
Part type	Kingpin grease nipple
System / group	Oils and lubricants

Compatibility

According to the product card, the part number is 816/60056A. Fit is confirmed by the part number or by the thread and size of the old part. Other parts are in Accessories.

Fitting

Remove the old nipple with a suitable spanner, start the new one by hand and tighten it gently, as overtightening can snap it. Then check that it takes grease.

Specifications

Machine system
Oils and lubricants
Part type
Kingpin grease nipple
Manufacturing type
Aftermarket

Questions: 0

No questions about this product.

Useful articles 07/10/2026 23

How to Check the Oil Levels on a JCB 3CX / 4CX: Hydraulics, Engine, Gearbox and Axles

On the JCB 3CX and 4CX the hydraulic oil level is checked at the sight glass on the hydraulic tank: park the machine on level ground, lower the loader shovel to the ground, close the excavator dipper, raise the boom, crowd the bucket and stop the engine; the oil should be at or above the red mark. Other units have their own rules: the gearbox level is checked on the dipstick after the engine has idled, and the axles and hubs are checked to the bottom of the filler hole. Below are step-by-step instructions, capacities and oil types from Section 3 of the JCB service manual.

JCB 3CX / 4CX 07/10/2026 26

JCB 3CX / 4CX Routine Maintenance: Service Intervals, Lubrication, Fluids and Filters

This page covers the routine maintenance section for the JCB 3CX / 4CX backhoe loader: service intervals by hour meter reading, pre-shift checks, lubrication points, fluids and capacities, and the standard procedures for each system — engine, fuel, hydraulics, transmission, axles, brakes and electrics.