12000 grease gun coupler, aftermarket

12000

Brand
JF Parts
Article
12000
Machine system
Oils and lubricants
Part type
Grease gun coupler
Manufacturing type
Aftermarket
All the features

In stock

0.00 ₺

We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.

Check the exact specifications and compatibility with your machine with our managers.

We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.

Free delivery to the carrier of your choice, or collect your order in Istanbul.

Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Message on WhatsApp Message on Telegram Call us: +90 531 224 49 66

12000 grease gun coupler is an aftermarket part for the construction machines. According to the product card, the coupler has a double grip.

A grease gun is a hand tool for pumping grease through grease nipples into joints and bearings. A lever gun pushes out a measured amount of grease at high pressure with each stroke of the lever and can be filled with a cartridge or bulk grease. The coupler is the part that fits onto the nipple and passes the grease without leaking; a worn coupler lets grease escape round the edge and slips off the nipple. Extension tubes and flexible hoses are used for nipples that are hard to reach.

Specifications

Production type	Aftermarket
Part type	Grease gun coupler
System / group	Oils and lubricants

Compatibility

According to the product card, the part number is 12000. Fit is confirmed by the part number or by the thread and size of the old part. Other parts are in Accessories.

Fitting

Fit the part to the gun so that it seals, using a thread seal or tape. On first use, bleed the air from the gun and check the grease flow.

Specifications

Machine system
Oils and lubricants
Part type
Grease gun coupler
Manufacturing type
Aftermarket

Questions: 0

No questions about this product.

Useful articles 07/10/2026 23

How to Check the Oil Levels on a JCB 3CX / 4CX: Hydraulics, Engine, Gearbox and Axles

On the JCB 3CX and 4CX the hydraulic oil level is checked at the sight glass on the hydraulic tank: park the machine on level ground, lower the loader shovel to the ground, close the excavator dipper, raise the boom, crowd the bucket and stop the engine; the oil should be at or above the red mark. Other units have their own rules: the gearbox level is checked on the dipstick after the engine has idled, and the axles and hubs are checked to the bottom of the filler hole. Below are step-by-step instructions, capacities and oil types from Section 3 of the JCB service manual.

JCB 3CX / 4CX 07/10/2026 26

JCB 3CX / 4CX Routine Maintenance: Service Intervals, Lubrication, Fluids and Filters

This page covers the routine maintenance section for the JCB 3CX / 4CX backhoe loader: service intervals by hour meter reading, pre-shift checks, lubrication points, fluids and capacities, and the standard procedures for each system — engine, fuel, hydraulics, transmission, axles, brakes and electrics.