Cylinder gland nut 594/14008 120x60 mm, aftermarket

594/14008

Brand
Ceylan Hidrolik
Article
594/14008
Machine system
Hydraulic system
Part type
Cylinder gland nut
Machine brand
JCB
Manufacturing type
Aftermarket
Compatibility
JCB 3CX, 4CX
Machine series
3CX, 4CX, 5CX
All the features

In stock

0,00 ₺

We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.

Check the exact specifications and compatibility with your machine with our managers.

We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.

Free delivery to the carrier of your choice, or collect your order in Istanbul.

Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Message on WhatsApp Message on Telegram Call us: +90 531 224 49 66

Cylinder gland nut 594/14008, 120x60 mm is an aftermarket part for the JCB 3CX and 4CX backhoe loaders.

The gland nut screws into the cylinder barrel and holds the rod gland in place, closing the open end of the cylinder. It is removed with a special spanner when the seals are changed at a rebuild; a nut with damaged threads or a crack stops the gland seating and causes leaks. The nut size is set by the cylinder bore and type, so it is chosen by part number. The nut is steel and is supplied new. The nut size and thread suit the barrel; compare the part number with the old nut. The nut is new and unused. Keep the nut boxed.

Specifications

Part number	594/14008
Production type	Aftermarket
Part type	Cylinder gland nut
System / group	Hydraulic system
Machine make	JCB
Series / model	3CX, 4CX, 5CX
Size	120x60 mm

Compatibility

Other parts are in JCB hydraulic cylinders.

Fitting

Before fitting the nut, check the gland and seals are seated correctly, as a nut started askew strips its thread easily.

Specifications

Machine system
Hydraulic system
Part type
Cylinder gland nut
Machine brand
JCB
Manufacturing type
Aftermarket
Compatibility
JCB 3CX, 4CX
Machine series
3CX, 4CX, 5CX

Questions: 0

No questions about this product.

Useful articles 07/10/2026 23

JCB 3CX and 4CX Dipper Ram Creep: Causes, Ram Creep Tests and Repair

If the dipper of a JCB 3CX or 4CX backhoe loader drops on its own under load, there are three possible causes: a leaking piston seal in the ram, spool leakage in the excavator valve section, or a leaking auxiliary relief valve (ARV) in that section. The JCB service manual gives a test procedure that identifies the culprit before the ram is removed and stripped. Below are the test sequence, the permitted creep and the repair rules from Section E of service manual 9803/3290.

Useful articles 07/10/2026 41

JCB 3CX / 4CX Hydraulic Pressure: Settings, Pressure Testing and Causes of Low Pressure

On JCB 3CX and 4CX backhoe loaders with a gear pump, the working pressure of the hydraulic system is limited by the main relief valve in the loader valve: 236–241 bar on machines up to serial number 964124 and 248–252 bar on machines from serial number 964125 (standard and high-pressure hydraulics). It is checked with a 0–400 bar pressure gauge connected to the loader valve test point, with the engine at 1500 rev/min and the oil warmed to 50 °C. Below are the settings, the test procedure and the reasons why pressure drops, taken from the JCB service manual (Section E).

JCB 3CX / 4CX 07/10/2026 18

JCB 3CX / 4CX Hydraulics: Circuit Diagrams, Pumps and Relief Valve Pressures

Section E of the JCB service manual (publication 9803/3290-14) deals with the hydraulic system of the JCB 3C, 3CX and 4CX backhoe loaders. It brings together technical data for the pumps and valve blocks, hydraulic circuits for machines of different build years, valve operation, fault finding tables, and the procedures for pressure testing and for overhauling the pump, valves and rams. The section PDF runs to 302 pages.

Useful articles 06/10/2026 37

Cylinder drift on a JCB 3CX/4CX: the cylinder, the spool or the ARV

If the boom or bucket creeps down under load, oil is escaping from the «locked» side of a cylinder. There are three causes: a worn piston seal, leakage past the control valve spool, or a leaking auxiliary relief valve (ARV). Here is how to find the culprit before buying parts and how much drift is normal. The data comes from the JCB service manual for 3C, 3CX and 4CX backhoe loaders.