Solenoid valve, slow mode 25/222657, aftermarket

25/222657

Brand
INTER
Article
25/222657
Machine system
Hydraulic system
Part type
Solenoid valve
Machine brand
JCB
Manufacturing type
Aftermarket
Compatibility
JCB 3CX, 4CX
All the features

In stock

0.00 ₺

We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.

Check the exact specifications and compatibility with your machine with our managers.

We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.

Free delivery to the carrier of your choice, or collect your order in Istanbul.

Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Message on WhatsApp Message on Telegram Call us: +90 531 224 49 66

For the JCB 3CX and 4CX backhoe loaders: solenoid valve, slow mode (tortoise) 25/222657, an aftermarket part. The card also lists 25/221142.

The valve has two parts: a hydraulic cartridge screwed into the body and an electrical coil fitted over it. When the coil burns out, often only the coil needs replacing; if the cartridge is dirty or worn, the whole valve is renewed. The coil voltage must suit the machine's electrical system, and the connector and wiring are checked during diagnosis. Dirty hydraulic oil is the most common cause of a sticking cartridge. The aftermarket valve matches the original in cavity size, coil voltage and connector type. After the swap, switch the function on and off a few times to check the valve responds without delay. The valve is supplied new with its O-rings fitted.

Specifications

Part number	25/222657
Cross / alternative numbers	25/221142
Production type	Aftermarket
Part type	Solenoid valve
System / group	Hydraulic system
Machine make	JCB

Compatibility

A three-way cartridge valve with a 12 V coil. The catalogue also has the genuine version of this part. Other parts are in Hydraulic valves.

Fitting

Relieve system pressure, unplug the connector and remove the valve. Clean the cavity, oil the new valve's O-rings and tighten it to the specified torque, without overtightening the coil nut. Reconnect the plug and check the function from the cab control.

Specifications

Machine system
Hydraulic system
Part type
Solenoid valve
Machine brand
JCB
Manufacturing type
Aftermarket
Compatibility
JCB 3CX, 4CX

Questions: 0

No questions about this product.

JCB 3CX / 4CX 07/10/2026 50

JCB 3CX and 4CX hydraulic circuit diagrams by build year, with component keys

There is no single hydraulic circuit for the JCB 3CX and 4CX backhoe loader: it depends on the build year and the pump type. Section E of the JCB service manual (publication 9803/3290-14) gives separate circuits for the gear pump 3CX built before and after September 2007, for the variable flow 4CX (7-spool and 6-spool), and for the 3C-14 (214e) and 3C machines. Below you will find the circuits themselves, the component keys and some notes on tracing the oil flow through a circuit.

Useful articles 07/10/2026 41

JCB 3CX / 4CX Hydraulic Pressure: Settings, Pressure Testing and Causes of Low Pressure

On JCB 3CX and 4CX backhoe loaders with a gear pump, the working pressure of the hydraulic system is limited by the main relief valve in the loader valve: 236–241 bar on machines up to serial number 964124 and 248–252 bar on machines from serial number 964125 (standard and high-pressure hydraulics). It is checked with a 0–400 bar pressure gauge connected to the loader valve test point, with the engine at 1500 rev/min and the oil warmed to 50 °C. Below are the settings, the test procedure and the reasons why pressure drops, taken from the JCB service manual (Section E).

JCB 3CX / 4CX 07/10/2026 18

JCB 3CX / 4CX Hydraulics: Circuit Diagrams, Pumps and Relief Valve Pressures

Section E of the JCB service manual (publication 9803/3290-14) deals with the hydraulic system of the JCB 3C, 3CX and 4CX backhoe loaders. It brings together technical data for the pumps and valve blocks, hydraulic circuits for machines of different build years, valve operation, fault finding tables, and the procedures for pressure testing and for overhauling the pump, valves and rams. The section PDF runs to 302 pages.