- BrandINTER
- Article25/222834
- Machine systemHydraulic system
- Part typeUnloader valve
- Machine brandJCB
- Manufacturing typeAftermarket
- CompatibilityJCB 3CX, 4CX
- All the features
For the JCB 3CX and 4CX backhoe loaders: unloader valve 25/222834, an aftermarket part.
The valve is a cartridge type that screws into its cavity on the pump or valve block, with a factory setting. Its body may carry the maker's marks and setting data. To diagnose it, measure the unloading pressure and the flow of each pump section separately. The aftermarket valve matches the original in cavity, thread and setting. An unloader fault can show as the engine bogging down and smoking black while digging; the same sign appears with fuel system faults, so the decision is made on hydraulic pressure readings. The valve is supplied new. The aftermarket valve comes with its O-rings fitted; oil them before fitting. The valve is made of steel. The valve is supplied new with a factory setting.
Specifications
| Part number | 25/222834 |
| Production type | Aftermarket |
| Part type | Unloader valve |
| System / group | Hydraulic system |
| Machine make | JCB |
Compatibility
The catalogue also has the genuine version of this part. Other parts are in Hydraulic valves.
Fitting
Relieve pressure, remove the valve and clean the cavity; oil the new valve's O-rings and tighten it to the specified torque. Start the engine and check engine speed under load and the unloading pressure.
Specifications
- Machine systemHydraulic system
- Part typeUnloader valve
- Machine brandJCB
- Manufacturing typeAftermarket
- CompatibilityJCB 3CX, 4CX
No questions about this product.
