Hydraulic pipe 128/C2652 JCB, aftermarket

For the JCB machines: hydraulic pipe 128/C2652, an aftermarket part.

The brackets and welded fixings on the pipe set its position on the machine, and on the new pipe they must sit where they were on the old one. Pipes are protected from corrosion with zinc or a similar coating, so take care not to scratch it during fitting. The union threads and seals at the pipe ends must be clean, since a dirty union leaks and carries dirt into the hydraulic system. When fitting, start every connection by hand first and then tighten the clamps and unions; this order keeps the pipe free of strain. The pipe is chosen by part number and compared with the old one for shape, end fittings and brackets. The aftermarket pipe comes new with its ends capped for transport. A leaking pipe not only loses oil but can also let dust and dirt into the system.

Specifications

Compatibility

Other parts are in Hydraulic pipes.

Fitting

Before fitting, release the system pressure and cap the hoses. Put the new pipe in place, start the connections by hand, then tighten the clamps and unions; start the engine and check for leaks. Do not bend or force the pipe during fitting, since a pipe under strain cracks.