- BrandJF Parts
- ArticleHFH-PDC-1/2M
- Machine systemHydraulic system
- Part typeQuick coupler dust cap
- Manufacturing typeAftermarket
- All the features
For the construction machines: quick coupling dust cap 3/4", male, an aftermarket part. The aftermarket product code is HFH-PDC-1/2M.
The cap is chosen by the coupling's nominal size (for example 3/4 or 1 inch) and by male or female end. Rubber caps are flexible and push onto the coupling, and many are tied to the hose or coupling with a strap so they are not lost. A torn cap or one that has lost its elasticity is replaced.
Specifications
| Production type | Aftermarket |
| Part type | Quick coupler dust cap |
| System / group | Hydraulic system |
Compatibility
The cap fits the male (nipple) half of a disconnected 3/4" flat-face quick coupling. The body is stepped: a wide part with a thickened rim narrows to a neck that ends in a small disc. The model code is HFH-PDC-1/2M: the M at the end and the stepped body on the photo show it is for the male half. It is red plastic, moulded in one piece with a thin cord and a ring; the ring goes over the hose or coupling body so the removed cap is not lost. It is sold separately from the coupling, one piece. The matching female cap is the 3/4" female dust cap. Other parts are in High-pressure hoses.
Fitting
When an attachment is removed, wipe the coupling ends and cap them straight away; before connecting, take the cap off and clean the end again. Couplings must not be connected under pressure, so release the line pressure first. The inside of the cap gets dirty with dust and oil residue over time, so the cap itself is also washed and dried now and then.
Specifications
- Machine systemHydraulic system
- Part typeQuick coupler dust cap
- Manufacturing typeAftermarket
No questions about this product.
