Hydraulic hose 3/8" 660 mm 332/H4267 JCB, genuine

332/H4267

Brand
JCB
Article
332/H4267
Machine system
Hydraulic system
Part type
Hydraulic hose
Machine brand
JCB
Manufacturing type
Original
All the features

In stock

0,00 ₺

We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.

Check the exact specifications and compatibility with your machine with our managers.

We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.

Free delivery to the carrier of your choice, or collect your order in Istanbul.

Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Message on WhatsApp Message on Telegram Call us: +90 531 224 49 66

For the JCB machines: hydraulic hose 3/8" 660 mm 332/H4267, a genuine JCB part.

Hose length, fittings and pressure rating are set by the application: a short hose is stretched and a long one chafes. The hose is therefore chosen by part number. Route and clamp it so that through the arm's full range of movement it neither twists nor touches sharp edges. The aftermarket hose has the same length and fitting types as the original, with a pressure rating to suit. After fitting, swing the arm fully left and right to check the hose is not stretched and does not rub on other hoses. The hose is supplied new with its ends capped. The outer cover resists abrasion, and a protective spiral can be used along the route. The hose is supplied new. The hose is chosen by part number. Check the hose routing after fitting.

Specifications

Part number	332/H4267
Manufacturer	JCB
Production type	Original
Part type	Hydraulic hose
System / group	Hydraulic system
Machine make	JCB

Compatibility

Other parts are in High-pressure hoses.

Fitting

Relieve pressure, prop the arm and cap the ends as the old hose comes off. Fit the new hose without twisting and tighten the fittings with new O-rings; work the arm through its full range to check the hose is neither stretched nor chafing.

Specifications

Machine system
Hydraulic system
Part type
Hydraulic hose
Machine brand
JCB
Manufacturing type
Original

Questions: 0

No questions about this product.

JCB 3CX / 4CX 07/10/2026 49

JCB 3CX and 4CX hydraulic circuit diagrams by build year, with component keys

There is no single hydraulic circuit for the JCB 3CX and 4CX backhoe loader: it depends on the build year and the pump type. Section E of the JCB service manual (publication 9803/3290-14) gives separate circuits for the gear pump 3CX built before and after September 2007, for the variable flow 4CX (7-spool and 6-spool), and for the 3C-14 (214e) and 3C machines. Below you will find the circuits themselves, the component keys and some notes on tracing the oil flow through a circuit.

Useful articles 07/10/2026 40

JCB 3CX / 4CX Hydraulic Pressure: Settings, Pressure Testing and Causes of Low Pressure

On JCB 3CX and 4CX backhoe loaders with a gear pump, the working pressure of the hydraulic system is limited by the main relief valve in the loader valve: 236–241 bar on machines up to serial number 964124 and 248–252 bar on machines from serial number 964125 (standard and high-pressure hydraulics). It is checked with a 0–400 bar pressure gauge connected to the loader valve test point, with the engine at 1500 rev/min and the oil warmed to 50 °C. Below are the settings, the test procedure and the reasons why pressure drops, taken from the JCB service manual (Section E).

JCB 3CX / 4CX 07/10/2026 18

JCB 3CX / 4CX Hydraulics: Circuit Diagrams, Pumps and Relief Valve Pressures

Section E of the JCB service manual (publication 9803/3290-14) deals with the hydraulic system of the JCB 3C, 3CX and 4CX backhoe loaders. It brings together technical data for the pumps and valve blocks, hydraulic circuits for machines of different build years, valve operation, fault finding tables, and the procedures for pressure testing and for overhauling the pump, valves and rams. The section PDF runs to 302 pages.