- BrandTimken
- Article907/52200
- Machine systemTransmission
- Part typeHub bearing
- Machine brandJCB
- Manufacturing typeAftermarket
- CompatibilityJCB 3CX, 4CX
- All the features
Hub bearing 907/52200 is an aftermarket part for the JCB 3CX and 4CX backhoe loaders. This bearing is the taper roller bearing of the planetary hub (wheel hub).
In construction machine axles the bearings support the gears and shafts and carry both radial and axial loads. On backhoe loaders and telehandlers the axle works hard, with bucket loads, shocks from rough ground and frequent changes of direction, and the bearings must carry these loads without upsetting the gear mesh. A worn bearing changes the gear clearances, causes whine and heat and in time damages the gears and seals, so it is replaced at the first signs of wear.
Specifications
| Part number | 907/52200 |
| Production type | Aftermarket |
| Part type | Hub bearing |
| System / group | Transmission |
| Machine make | JCB |
Compatibility
According to sources, 907/52200 (907/20043, 907/50000) is a 37425/37625 taper roller bearing used in the front and rear hubs of JCB 3CX, 4CX, 3D and 214-217 backhoe loaders. The catalogue also has the aftermarket version (option 2), aftermarket version (option 3), aftermarket version (option 4) and genuine version of this part. Other parts are in Bearings.
Fitting
When the old bearing is removed, check the housing and shaft seat for burrs, rust and wear, since a worn seat lets the new bearing spin. Renew the seals and O-rings next to the bearing too. When the axle oil is drained, look at the metal particles in it: a lot of particles suggests the gears may also be worn.
Specifications
- Machine systemTransmission
- Part typeHub bearing
- Machine brandJCB
- Manufacturing typeAftermarket
- CompatibilityJCB 3CX, 4CX
No questions about this product.
