Oil filter W21ES-O1C00 Kubota, aftermarket

For the Kubota machines: oil filter W21ES-O1C00, an aftermarket part.

Oil filters differ in thread, seal diameter, filter paper structure and bypass valve opening pressure, and a filter that looks similar may have a bypass pressure unsuited to the engine, so the filter is chosen by part number. Many oil filters also have an anti-drain valve, which stops oil draining from the filter when the engine is stopped so that oil pressure builds quickly at start-up. The filter comes new, and its part number and seal diameter are compared with the old one.

Specifications

Compatibility

According to sources, W21ES-O1C00 is the Kubota oil filter that supersedes HH1C0-32430, used on V3300, V3600 and V3800-engined machines such as the KX033-4, SVL75 and M-series tractors. Other parts are in Other filters.

Fitting

The oil filter is changed together with the engine oil, with the engine warm, since warm oil drains better and carries the dirt with it. Remove the old filter, clean the seal face and check that the old seal has not stayed on the housing. Lubricate the new filter's seal with clean engine oil, screw it on by hand and tighten by the amount the maker specifies. Start the engine, check that the oil pressure lamp goes out and there is no leak around the filter, then top up the oil level. Check the engine oil level with the dipstick a few minutes after stopping, with the machine on level ground; it must be between the marks. Too much oil is as harmful as too little, causing foaming and seal leaks.