- BrandJF Parts
- ArticleГайка М24х1.5х28
- Machine systemVarious systems
- Part typeNut
- Machine brandJCB
- Manufacturing typeAftermarket
- All the features
For the JCB machines: nut M24x1.5, an aftermarket part. According to the product card, this part is a nut, size M24x1.5.
Nuts differ in thread size and pitch, spanner size, height, strength grade and locking method. Metric and inch (UNF, UNC) nuts may look alike but are not interchangeable, and a nut with the wrong thread will damage the bolt thread on the first tightening. The nut is therefore chosen by part number and checked against the bolt thread. Where possible, the nut and bolt are taken from the same strength grade and standard.
Specifications
| Production type | Aftermarket |
| Part type | Nut |
| Machine make | JCB |
Compatibility
According to the product card, this is a nut of size M24x1.5; the card gives no part number. Fit is confirmed by the dimensions of the old part. Other parts are in Fasteners.
Fitting
Before fitting the nut, clean the thread of the bolt or stud and repair any damaged thread. Tighten the nut to the specified torque; self-locking nuts are usually replaced once removed. In joints with several nuts, tighten them in a cross pattern and in stages.
Specifications
- Machine systemVarious systems
- Part typeNut
- Machine brandJCB
- Manufacturing typeAftermarket
No questions about this product.
