Bracket 02/200427 Perkins AK, OEM

Bracket 02/200427 is an OEM part for the Perkins 1000 series (AK) engine.

A bracket holds a part in position on the engine or frame and carries its load. Vibration and heat cycles can crack it over time, and a cracked or bent bracket lets the part rattle, lose its alignment and overload its fixings. Shape and hole pattern are set by the application, so it is chosen by part number. Welded brackets usually crack again in the same place. The bracket is pressed steel or a casting, painted against corrosion. Its holes keep the part in the right position and clear of other components. Check the fixing bolts when replacing it. Shape and hole pattern are defined by the part number, and a different bracket will not fit the mounting points. The bracket is painted, and its mounting faces must be flat and clean.

Specifications

Compatibility

The part is listed for JCB backhoe loaders with Perkins engines. Other parts are in Engine.

Fitting

Place the bracket on clean faces, start the bolts by hand, align the part and then tighten to the specified torque. Afterwards check the part sits without strain. The bracket is supplied new.