Temperature sender 701/80627 JCB, aftermarket

701/80394

Brand
DGR
Article
701/80394
Machine system
Sensors
Part type
Temperature sender
Machine brand
JCB
Manufacturing type
Aftermarket
All the features

In stock

0.00 ₺

We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.

Check the exact specifications and compatibility with your machine with our managers.

We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.

Free delivery to the carrier of your choice, or collect your order in Istanbul.

Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Message on WhatsApp Message on Telegram Call us: +90 531 224 49 66

Temperature sender 701/80627 is an aftermarket part for the JCB machines. The card also lists 701/80394.

A transmission oil temperature sender warns the operator when the gearbox oil overheats. Overheating is caused by long periods under heavy load, slipping, a blocked oil cooler or low oil level, and it shortens the life of the clutch plates and seals. When the warning comes on, let the machine idle without load so the oil cools, and find the cause. Do not change the sender with hot oil, and check the oil level after fitting it. Clean the transmission oil cooler fins along with the radiator, since blocked fins are the commonest cause of oil overheating. The sender comes new.

Specifications

Part number	701/80627
Cross / alternative numbers	701/80394
Production type	Aftermarket
Part type	Temperature sender
System / group	Sensors
Machine make	JCB

Compatibility

The product card lists it as a transmission oil temperature sender. Other parts are in Sensors.

Fitting

Before the change, switch off the ignition and disconnect the battery negative if needed. Remove the connector by pressing its latch, never by pulling the wires. After fitting the new part, push the clean, dry connector fully home and check that the latch has clicked into place. After reconnecting the battery, check the function and the instrument panel.

Specifications

Machine system
Sensors
Part type
Temperature sender
Machine brand
JCB
Manufacturing type
Aftermarket

Questions: 0

No questions about this product.

07/10/2026 68

JCB 3CX and 4CX wiring diagrams before and after May 2009: sheets and component keys

Section C of the JCB service manual (publication 9803/3290-15) gives the JCB 3CX and 4CX backhoe loader wiring diagram in two versions: one for machines built up to May 2009 with analogue instruments and one for machines from May 2009 with the digital instrument panel. On the earlier machines the main machine circuit takes two sheets, with separate circuits for the gearboxes and options; the later circuit runs to 15 sheets. Below are the main sheets, the component keys and a guide to reading wire numbers.

07/10/2026 37

JCB 3CX / 4CX Electrics: Fuses, Relays, Battery, Alternator and Starter Motor Tests

Section C of the JCB service manual (publication 9803/3290-15) covers the electrical system of JCB 3C, 3CX and 4CX backhoe loaders: fuses and relays, circuit diagrams for machines of different build years, battery, alternator and starter motor testing, the wire numbering system, harness repair, earth points and harness drawings. The PDF has 402 pages, most of them harness drawings.