Temperature sender 333/K3082 JCB JS, aftermarket

333/K3082

Brand
JF Parts
Article
333/K3082
Machine system
Sensors
Part type
Temperature sender
Machine brand
JCB
Manufacturing type
Aftermarket
All the features

In stock

0.00 ₺

We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.

Check the exact specifications and compatibility with your machine with our managers.

We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.

Free delivery to the carrier of your choice, or collect your order in Istanbul.

Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Message on WhatsApp Message on Telegram Call us: +90 531 224 49 66

Temperature sender 333/K3082 is an aftermarket part for the JCB JS crawler excavators.

A temperature sender measures coolant or oil temperature and passes it to the instrument panel, triggering a warning when the temperature exceeds a set value. The resistance of the thermistor inside the sender changes with temperature, and the gauge shows this as temperature. A faulty sender makes the gauge read constantly low or high, sets off a needless overheat warning or misses real overheating. Before replacing it, check the coolant level, thermostat and radiator; the sender can be verified by measuring its resistance at different temperatures. Scale and deposits on the sender tip slow the reading, so using the right antifreeze in the cooling system also helps the sender read accurately.

Specifications

Part number	333/K3082
Production type	Aftermarket
Part type	Temperature sender
System / group	Sensors
Machine make	JCB

Compatibility

According to sources, 333/K3082 is a temperature sensor used on JCB JS200 to JS350 excavators. Other parts are in Sensors.

Fitting

Moisture and corrosion inside the connector are a common cause of false signals from sensors and switches, so clean the connector and use contact spray if needed. Renew the connector seal if it is missing. The part is chosen by part number, and its connector type is compared with the old part.

Specifications

Machine system
Sensors
Part type
Temperature sender
Machine brand
JCB
Manufacturing type
Aftermarket

Questions: 0

No questions about this product.

Useful articles 07/10/2026 27

JCB JS200–JS260 Monitor Messages: What They Mean and What to Check

On JCB JS200, JS210, JS220, JS240 and JS260 tracked excavators with the AMS control system, the monitor in the cab shows the working mode, the time, gauges for oil temperature, coolant temperature and fuel level, and warnings in the message line. Each message first of all points to a real problem: low fuel or coolant, a blocked filter, overheating. But if a message stays on after the cause has been put right, the sensor, wiring or controller is at fault. Below is what each message means and what to check, based on Section C of JCB service manual 9803/6400.

JCB JS200–JS260 07/10/2026 26

JCB JS200–JS260 Electrics and AMS System: Service Manual Section C

Section C of JCB service manual 9803/6400 covers the electrics of the JCB JS200, JS210, JS220, JS240 and JS260 tracked excavators fitted with the AMS (Advanced Management System). AMS is the electronic system that manages the whole machine and replaced CAPS II: it controls engine speed through the throttle stepper motor, pump power, travel speeds, excavator functions, lighting, the wiper, auxiliary circuits and warning lights. The section contains technical data, fuses, control locations, operating logic, self-diagnosis and fault finding by monitor messages. The PDF runs to 98 pages.