Heater control panel 332/K4896 JCB JS, aftermarket

332/K4896

Article
332/K4896
Machine system
Cab
Part type
Instrument panel
Machine brand
JCB
Manufacturing type
Aftermarket
All the features

In stock

0,00 ₺

We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.

Check the exact specifications and compatibility with your machine with our managers.

We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.

Free delivery to the carrier of your choice, or collect your order in Istanbul.

Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Message on WhatsApp Message on Telegram Call us: +90 531 224 49 66

For the JCB JS crawler excavators: heater control panel 332/K4896, an aftermarket part. The card also lists 30/927073.

According to sources, 332/K4896 is the control panel of the cab heating system on JCB JS excavators; the product card lists it together with the number 30/927073. It lets the operator manage cab temperature, fan speed and air distribution directly. Excavator operators work long hours in the cab, so working heating and ventilation matter both for comfort and to keep the glass clear. The panel is chosen after checking the machine model and serial number.

Specifications

Part number	332/K4896
Cross / alternative numbers	30/927073
Production type	Aftermarket
Part type	Instrument panel
System / group	Cab
Machine make	JCB

Compatibility

Other parts are in Control units.

Fitting

Before the change, switch off the ignition and disconnect the battery negative. Remove the panel by undoing its frame screws and unplug its connectors by pressing their latches. Connect the new panel to the same connectors and fix it. After reconnecting the battery, switch on the ignition and check that all gauges and warning lamps light during the test and then show normal readings. The part comes new; before fitting, compare its part number, voltage and connection type with the old part. After the change, check the function and the warnings on the instrument panel; the connections must be clean, dry and tight.

Specifications

Machine system
Cab
Part type
Instrument panel
Machine brand
JCB
Manufacturing type
Aftermarket

Questions: 0

No questions about this product.

Useful articles 07/10/2026 23

JCB JS200–JS260 Monitor Messages: What They Mean and What to Check

On JCB JS200, JS210, JS220, JS240 and JS260 tracked excavators with the AMS control system, the monitor in the cab shows the working mode, the time, gauges for oil temperature, coolant temperature and fuel level, and warnings in the message line. Each message first of all points to a real problem: low fuel or coolant, a blocked filter, overheating. But if a message stays on after the cause has been put right, the sensor, wiring or controller is at fault. Below is what each message means and what to check, based on Section C of JCB service manual 9803/6400.

JCB JS200–JS260 07/10/2026 24

JCB JS200–JS260 Electrics and AMS System: Service Manual Section C

Section C of JCB service manual 9803/6400 covers the electrics of the JCB JS200, JS210, JS220, JS240 and JS260 tracked excavators fitted with the AMS (Advanced Management System). AMS is the electronic system that manages the whole machine and replaced CAPS II: it controls engine speed through the throttle stepper motor, pump power, travel speeds, excavator functions, lighting, the wiper, auxiliary circuits and warning lights. The section contains technical data, fuses, control locations, operating logic, self-diagnosis and fault finding by monitor messages. The PDF runs to 98 pages.