Auxiliary control unit (PC4 AUX ECU) 728/M4799

728/M4799

Brand
JF Parts
Article
728/M4799
Machine system
Electrics
Part type
Control unit
Machine brand
JCB
Manufacturing type
Aftermarket
Compatibility
JCB 3CX, 4CX
All the features

In stock

0,00 ₺

We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.

Check the exact specifications and compatibility with your machine with our managers.

We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.

Free delivery to the carrier of your choice, or collect your order in Istanbul.

Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Message on WhatsApp Message on Telegram Call us: +90 531 224 49 66

For the JCB 3CX and 4CX backhoe loaders: auxiliary control unit (PC4 AUX ECU) 728/M4799, an aftermarket part.

According to sources, 728/M4799 is the PC4 AUX ECU used on JCB 3CX and 4CX backhoe loaders, and some sources also give the numbers 728/H7755, 728/31500 and 728/29400 for the same group of units. The unit sits inside the cab where it is protected from moisture and vibration. Water getting into the cab, for example rain leaking past a window seal, can corrode the unit and its connectors, so check the cab's sealing when replacing the unit. Confirm with the serial number when ordering that the new unit suits the machine's software version.

Specifications

Part number	728/M4799
Production type	Aftermarket
Part type	Control unit
System / group	Electrics
Machine make	JCB

Compatibility

Other parts are in Control units.

Fitting

Before replacing the control unit, switch off the ignition and disconnect the battery negative, then unplug the connectors by pressing their latches. After fitting the new unit, if the machine's software and settings require it, program or configure the unit with the JCB diagnostic tool (ServiceMaster). Push the connectors fully home without bending any pins and test every function. The part comes new; before fitting, compare its part number and connection type with the old part. After the change, check the function and the warnings on the instrument panel.

Specifications

Machine system
Electrics
Part type
Control unit
Machine brand
JCB
Manufacturing type
Aftermarket
Compatibility
JCB 3CX, 4CX

Questions: 0

No questions about this product.

07/10/2026 68

JCB 3CX and 4CX wiring diagrams before and after May 2009: sheets and component keys

Section C of the JCB service manual (publication 9803/3290-15) gives the JCB 3CX and 4CX backhoe loader wiring diagram in two versions: one for machines built up to May 2009 with analogue instruments and one for machines from May 2009 with the digital instrument panel. On the earlier machines the main machine circuit takes two sheets, with separate circuits for the gearboxes and options; the later circuit runs to 15 sheets. Below are the main sheets, the component keys and a guide to reading wire numbers.

07/10/2026 37

JCB 3CX / 4CX Electrics: Fuses, Relays, Battery, Alternator and Starter Motor Tests

Section C of the JCB service manual (publication 9803/3290-15) covers the electrical system of JCB 3C, 3CX and 4CX backhoe loaders: fuses and relays, circuit diagrams for machines of different build years, battery, alternator and starter motor testing, the wire numbering system, harness repair, earth points and harness drawings. The PDF has 402 pages, most of them harness drawings.