Loader arm split bush 809/10030 JCB 3CX/4CX, aftermarket

For the JCB 3CX and 4CX backhoe loaders: loader arm split bush 809/10030, an aftermarket part. According to the product card, this part is a loader arm split bush.

Bushes differ in inside and outside diameter, length, material (hardened steel, bronze or brass) and the shape of the grease passage, and each joint has its own part number. Split bushes close up slightly as they are fitted into the eye, which makes them easier to change. Repair-size bushes are made with a larger outside diameter for worn and re-bored eyes. The bush is chosen by part number to suit the pin diameter and eye size. The two bushes in one joint are usually replaced together.

Specifications

Compatibility

According to the product card, the part number is 809/10030. Fit is confirmed by the part number and the machine serial number. The catalogue also has the genuine version of this part. Other parts are in JCB CX series bushings.

Fitting

Remove the old bush with a puller or press, clean the eye and remove any burrs. Lightly oil the new bush and press it in square to the axis, then fit the pin and grease the joint.