- BrandJF Parts
- Article802/01465
- Machine systemHydraulic system
- Part typeBush
- Machine brandHIDROMEK
- Manufacturing typeAftermarket
- Machine seriesHMK 102B, HMK 102S, HMK 105, HMK 62
- All the features
Bush 802/01465 is an aftermarket part for the Hidromek backhoe loaders. According to the product card, this part is a bush.
When the bush is replaced, the pin is measured too, as a worn pin soon ruins a new bush. The new bush is fitted square with a suitable drift or press after the eye has been cleaned, and is never struck directly with a hammer. The grease hole in the bush is lined up with the grease passage in the eye. After assembly the joint is greased until the old grease and dirt come out, and it is greased more often during the first days. If the grease passage is blocked, the bush soon runs dry.
Specifications
| Part number | 802/01465 |
| Production type | Aftermarket |
| Part type | Bush |
| System / group | Hydraulic system |
| Machine make | HIDROMEK |
| Series / model | HMK 102B, HMK 102S, HMK 105, HMK 62 |
Compatibility
According to the product card, the part number is 802/01465. Fit is confirmed by the part number and the machine serial number. Other parts are in Hidromek bushings.
Fitting
Remove the old bush with a puller or press, clean the eye and remove any burrs. Lightly oil the new bush and press it in square to the axis, then fit the pin and grease the joint.
Specifications
- Machine systemHydraulic system
- Part typeBush
- Machine brandHIDROMEK
- Manufacturing typeAftermarket
- Machine seriesHMK 102B, HMK 102S, HMK 105, HMK 62
No questions about this product.
