Black stabiliser rubber pad 980/88215 JCB 3CX/4CX, aftermarket

For the JCB 3CX and 4CX backhoe loaders: black stabiliser rubber pad 980/88215, an aftermarket part. According to the product card, this part is a stabiliser rubber pad (black).

Feet and pads are chosen by part number for the machine model and type of leg. The foot pin and bush are checked for wear, as a loose foot makes the machine rock. Rubber pads are replaced when they are torn or have hardened, and the pad bolts are tightened regularly. The foot and pad take the load every time the machine is lowered onto its legs, so they are checked regularly for cracks and wear; when working on asphalt, check that the pad is in place. If the foot pin will not take grease, the nipple and passage are cleaned.

Specifications

Compatibility

According to the product card, the part number is 980/88215. Fit is confirmed by the part number and the machine serial number. The catalogue also has the aftermarket version of this part. Other parts are in Body parts.

Fitting

Before working on a stabiliser, park the machine on level ground, lower the legs to touch the ground, release the pressure and make the machine safe. After fitting the part, extend and retract the legs fully a few times, check the clearance and friction, and grease the slides and pins.