Backhoe kingpost 316-1079 CAT, aftermarket

For the Caterpillar backhoe loaders: backhoe kingpost 316-1079, an aftermarket part. According to the product card, this part is a backhoe kingpost.

Kingposts vary by machine model and swing system and are chosen by part number. When the kingpost is replaced, the swing pins, their bushes and thrust washers are checked, as a new kingpost on worn pins soon develops play. After assembly the swing joint is greased and the boom tried through its full swing angle. The swing pin nipples are greased every day. The kingpost pin eyes are measured, as oval eyes leave play even with new pins and bushes. Fine cracks at the welds show as rust marks under the paint, so the kingpost is inspected after cleaning.

Specifications

Compatibility

According to the product card, the part number is 316-1079. The card also lists 209-6862. Fit is confirmed by the part number and the machine serial number. Other parts are in Backhoe arm.

Fitting

Large structural parts are fitted with suitable lifting equipment, with the machine made safe and the attachments lowered to the ground. Pins and bushes are cleaned and greased, and bolts tightened to the specified torque. After assembly the movement is tried slowly through its full travel to check that nothing binds.