- Article910/60106
- Machine systemBackhoe boom
- Part typeBackhoe boom latch cable
- Machine brandJCB
- Manufacturing typeOEM
- CompatibilityJCB 3CX, 4CX
- All the features
Backhoe boom latch cable 910/60106 is an OEM part for the JCB 3CX and 4CX backhoe loaders. According to the product card, this part is a backhoe boom latch cable.
The boom lock holds the backhoe boom in the transport position and stops it lowering or swinging on its own while travelling on the road or during maintenance. The lock is operated from the cab by a cable or lever, while stops and limiters restrict the boom's travel. A rusted cable, a worn lock tongue or a missing stop means the boom will not lock and swings while driving, which is dangerous for both the machine and people nearby. The sleeve and ends of the lock cable are checked for rust, as water that gets into the sleeve can freeze in winter and jam the cable. The lock tongue and its seat are kept clean and lightly greased.
Specifications
| Part number | 910/60106 |
| Production type | OEM |
| Part type | Backhoe boom latch cable |
| System / group | Backhoe boom |
| Machine make | JCB |
Compatibility
According to the product card, the part number is 910/60106. The card also lists 102171524. Fit is confirmed by the part number and the machine serial number. The catalogue also has the aftermarket version of this part. Other parts are in Backhoe arm.
Fitting
After fitting, operate the lock from the cab several times and check that it locks and releases fully.
Specifications
- Machine systemBackhoe boom
- Part typeBackhoe boom latch cable
- Machine brandJCB
- Manufacturing typeOEM
- CompatibilityJCB 3CX, 4CX
No questions about this product.
