- BrandMULTI
- Article904/06500
- Machine systemHydraulic system
- Part typePin seal
- Machine brandJCB
- Manufacturing typeAftermarket
- All the features
Axle pivot pin seal 904/06500 is an aftermarket part for the JCB machines. According to the product card, this is the axle oscillation (balance) pin seal.
A pin dust seal is fitted where the pin leaves the bush in boom, dipper, bucket or steering joints. Its job is to keep the grease in the bush and stop sand, mud and water getting between the pin and bush. In a joint with a torn seal, the grease is quickly pushed out and abrasive dust wears the pin and bush in a short time, leading to play and knocking.
Specifications
| Part number | 904/06500 |
| Production type | Aftermarket |
| Part type | Pin seal |
| System / group | Hydraulic system |
| Machine make | JCB |
Compatibility
According to the product card, 904/06500 is a pin dust seal. Fit is confirmed by the part number. Other parts are in Seals and oil seals.
Fitting
Clean the seat and press the seal in with its lip facing outwards, towards the dirt. When fitting the pin, make sure the seal lip does not fold over and lightly grease the pin end. After assembly, grease the joint and check the seal again after a few hours of work.
Specifications
- Machine systemHydraulic system
- Part typePin seal
- Machine brandJCB
- Manufacturing typeAftermarket
No questions about this product.
