- BrandJCB
- Article458/20744
- Machine systemTransmission
- Part typeAxle housing
- Machine brandJCB
- Manufacturing typeOriginal
- All the features
Axle housing 458/20744 is a genuine JCB part for the JCB machines. The number comes from the product card and was not found in open catalogues. Compare the part with the old one and check the machine serial number.
The axle housing (beam) is the main casting of a drive axle, holding the differential, the axle shafts and the knuckles at its ends. It transfers the machine weight and working loads to the frame and, on oscillating axles, also carries the pivot trunnions. A cracked housing loses oil, while a bent one misaligns the knuckles so the bearings and seals run off-centre and the tyres wear unevenly. A damaged housing cannot be repaired safely and is replaced.
Specifications
| Part number | 458/20744 |
| Manufacturer | JCB |
| Production type | Original |
| Part type | Axle housing |
| System / group | Transmission |
| Machine make | JCB |
Compatibility
According to the product card, the part number is 458/20744. Fit is confirmed by the part number and the machine serial number. Other parts are in Front axle.
Fitting
The housing is chosen by part number for the axle type, as one axle family can use different housings for different machines. During the change, the differential, axle shafts, knuckles and brake parts are moved to the new housing and all seals and gaskets renewed. After assembly, fill the axle with the specified oil and check the steering angles and toe-in. Protect the machined faces before painting the new housing.
Specifications
- Machine systemTransmission
- Part typeAxle housing
- Machine brandJCB
- Manufacturing typeOriginal
No questions about this product.
