Left jaw eye 123/04275 JCB 3CX/4CX, aftermarket

123/04275

Brand
BOYPAR
Article
123/04275
Machine system
Attachments
Part type
Left jaw eye
Machine brand
JCB
Manufacturing type
Aftermarket
Compatibility
JCB 3CX, 4CX
All the features

In stock

0,00 ₺

We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.

Check the exact specifications and compatibility with your machine with our managers.

We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.

Free delivery to the carrier of your choice, or collect your order in Istanbul.

Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Message on WhatsApp Message on Telegram Call us: +90 531 224 49 66

Left jaw eye 123/04275 is an aftermarket part for the JCB 3CX and 4CX backhoe loaders. According to the product card, this part is a left jaw eye.

A multi-purpose (6-in-1) loader bucket consists of two parts: the bucket body and a front jaw opened and closed by hydraulic cylinders. This lets the bucket load, grade, grab, doze and dump by opening. The jaw is connected to the body through hinge eyes and side cheeks. Wear in the eyes and cheeks stops the jaw closing fully against the body and lets material spill, while a broken eye puts the jaw out of action. The cylinder pins and bushes of a clam bucket are greased every day. If light shows between jaw and body when closed, or material spills, the eyes and cheeks are checked for wear; an early repair stops the jaw and body from distorting.

Specifications

Part number	123/04275
Production type	Aftermarket
Part type	Left jaw eye
System / group	Attachments
Machine make	JCB

Compatibility

According to the product card, the part number is 123/04275. Fit is confirmed by the part number and the adaptor or bucket model. Other parts are in Buckets.

Fitting

Before fitting weld-on parts, remove the old part and weld remains, tack the new part with the hinge axis aligned and weld it fully once checked. After fitting, open and close the jaw a few times to check that it moves freely.