- BrandINTER
- Article331/23192
- Machine systemFront axle
- Part typeTrack rod end boot
- Machine brandJCB
- Manufacturing typeAftermarket
- CompatibilityJCB 4CX
- All the features
For the JCB 4CX backhoe loaders: track rod end boot 4CX 331/23192, an aftermarket part. According to the product card, this is the track rod end boot of the 4CX.
The boot is chosen by joint type and machine model, as the track rod end and rod joint boots of the same machine can differ in size. Inspect the boots at every service and replace any that are cracked, torn or displaced; if the joint has play, renew the track rod end too.
Specifications
| Part number | 331/23192 |
| Production type | Aftermarket |
| Part type | Track rod end boot |
| System / group | Front axle |
| Machine make | JCB |
Compatibility
According to the product card, 331/23192 is a track rod boot. Fit is confirmed by the part number. Other parts are in Seals and oil seals.
Fitting
For the change, disconnect the joint, remove the old boot and clean the joint. Fill the boot with suitable grease, seat it and fit its circlip or clip if there is one. After assembly, turn the steering fully both ways to check the boot is not stretched, and adjust the toe-in if necessary.
Specifications
- Machine systemFront axle
- Part typeTrack rod end boot
- Machine brandJCB
- Manufacturing typeAftermarket
- CompatibilityJCB 4CX
No questions about this product.
