- BrandMULTI
- Article813/00425
- Machine systemHydraulic system
- Part typePin seal
- Machine brandJCB
- Manufacturing typeAftermarket
- CompatibilityJCB 3CX, 4CX
- All the features
For the JCB 3CX and 4CX backhoe loaders: pin dust seal 813/00425, an aftermarket part.
A pin seal is chosen by pin diameter and by the outside diameter and width of its seat, so different joints on one machine use different seals. It is usually renewed along with the pin and bush, but in a joint where only the seal is damaged it can be replaced on its own. After the change, grease the joint until clean grease comes out.
Specifications
| Part number | 813/00425 |
| Production type | Aftermarket |
| Part type | Pin seal |
| System / group | Hydraulic system |
| Machine make | JCB |
Compatibility
According to the product card, 813/00425 is a pin dust seal. Fit is confirmed by the part number. Other parts are in Seals and oil seals.
Fitting
Clean the seat and press the seal in with its lip facing outwards, towards the dirt. When fitting the pin, make sure the seal lip does not fold over and lightly grease the pin end. After assembly, grease the joint and check the seal again after a few hours of work.
Specifications
- Machine systemHydraulic system
- Part typePin seal
- Machine brandJCB
- Manufacturing typeAftermarket
- CompatibilityJCB 3CX, 4CX
No questions about this product.
