- BrandTUXAR
- Article320/04040
- Machine systemEngine
- Part typeO-ring
- Machine brandJCB
- Manufacturing typeAftermarket
- All the features
For the machines with the JCB Dieselmax 444 engine: oil cooler O-ring 320/04040, an aftermarket part. This ring is used at the oil cooler connection.
A ring is defined by inside diameter, cross-section and material, and even rings that look alike can differ in hardness or material. In hydraulic and fuel systems a ring of the wrong material swells or cracks, and in high-pressure joints a size mismatch lets the ring extrude from its groove. The ring is therefore chosen by part number.
Specifications
| Part number | 320/04040 |
| Production type | Aftermarket |
| Part type | O-ring |
| System / group | Engine |
| Machine make | JCB |
Compatibility
According to the product card, 320/04040 is an engine O-ring. Fit is confirmed by the part number. The catalogue also has the genuine version of this part. Other parts are in Seals and oil seals.
Fitting
On assembly, clean the groove and mating face, wet the ring with the working fluid or suitable grease and seat it without twisting. Protect the ring as it passes sharp edges and threads, tighten the joint to the specified torque and check for leaks under pressure. Spare rings are stored somewhere cool and dark, since rubber in sunlight cracks at the surface. Before fitting, inspect the ring for cracks and cuts.
Specifications
- Machine systemEngine
- Part typeO-ring
- Machine brandJCB
- Manufacturing typeAftermarket
No questions about this product.
