- BrandMULTI
- ArticleF06/17366
- Machine systemHydraulic system
- Part typeO-ring
- Machine brandHIDROMEK
- Manufacturing typeAftermarket
- Machine seriesHMK 102B, HMK 102S, HMK 105, HMK 62
- All the features
O-ring F06/17366 is an aftermarket part for the Hidromek backhoe loaders.
An O-ring is a rubber ring that seals the round joint between two parts: it sits in a groove and is squeezed on assembly, stopping oil, hydraulic fluid or fuel escaping. JCB machines use hundreds of O-ring sizes in hydraulic connections, pump and valve bodies, axles and transmissions. A hardened, flattened or cut ring causes leaks and loss of pressure.
Specifications
| Part number | F06/17366 |
| Production type | Aftermarket |
| Part type | O-ring |
| System / group | Hydraulic system |
| Machine make | HIDROMEK |
| Series / model | HMK 102B, HMK 102S, HMK 105, HMK 62 |
Compatibility
According to the product card, F06/17366 is an O-ring. Fit is confirmed by the part number. Other parts are in Seals and oil seals.
Fitting
On assembly, clean the groove and mating face, wet the ring with the working fluid or suitable grease and seat it without twisting. Protect the ring as it passes sharp edges and threads, tighten the joint to the specified torque and check for leaks under pressure. Spare rings are stored somewhere cool and dark, away from sunlight and ozone, since rubber left in the light cracks at the surface and starts leaking soon after fitting. Before fitting, inspect the ring for cracks, cuts and moulding flash.
Specifications
- Machine systemHydraulic system
- Part typeO-ring
- Machine brandHIDROMEK
- Manufacturing typeAftermarket
- Machine seriesHMK 102B, HMK 102S, HMK 105, HMK 62
No questions about this product.
