- BrandJF Parts
- Article828/10180
- Machine systemHydraulic system
- Part typeO-ring
- Machine brandJCB
- Manufacturing typeAftermarket
- All the features
O-ring 828/10180 is an aftermarket part for the JCB machines.
When hunting a leak, check the joint's O-rings first, since many oil leaks come not from expensive parts but from these small rings failing. Whenever a joint is taken apart, renew its ring, as the old one has taken a permanent set and will not seal again.
Specifications
| Part number | 828/10180 |
| Production type | Aftermarket |
| Part type | O-ring |
| System / group | Hydraulic system |
| Machine make | JCB |
Compatibility
According to the product card, 828/10180 is an O-ring. Fit is confirmed by the part number. Other parts are in Seals and oil seals.
Fitting
On assembly, clean the groove and mating face, wet the ring with the working fluid or suitable grease and seat it without twisting. Protect the ring as it passes sharp edges and threads, tighten the joint to the specified torque and check for leaks under pressure. Spare rings are stored somewhere cool and dark, away from sunlight and ozone, since rubber left in the light cracks at the surface and starts leaking soon after fitting. Before fitting, inspect the ring for cracks, cuts and moulding flash.
Specifications
- Machine systemHydraulic system
- Part typeO-ring
- Machine brandJCB
- Manufacturing typeAftermarket
No questions about this product.
