- BrandMULTI
- ArticleS48/91230
- Machine systemHydraulic system
- Part typeCylinder seal kit
- Machine brandHIDROMEK
- Manufacturing typeAftermarket
- Machine seriesHMK 102B, HMK 102S, HMK 105, HMK 62
- All the features
For the Hidromek backhoe loaders: hydraulic cylinder seal kit S48/91230, an aftermarket part.
The main signs that the seals need changing are an oil ring on the rod and drips from the gland, the boom or dipper creeping down under load (internal leakage past the piston seal) and slower movements. A leaking cylinder lowers the tank level, and dust getting in wears both the seals and the pump and valves. Seal replacement should therefore not be put off.
Specifications
| Part number | S48/91230 |
| Production type | Aftermarket |
| Part type | Cylinder seal kit |
| System / group | Hydraulic system |
| Machine make | HIDROMEK |
| Series / model | HMK 102B, HMK 102S, HMK 105, HMK 62 |
Compatibility
According to the product card, Hidromek S48/91230 is a hydraulic cylinder seal kit. Fit is confirmed by the cylinder or kit part number. Other parts are in Repair kits.
Fitting
No sharp tools are used when fitting the seals: fold the seal slightly into a kidney shape, insert it in the groove and ease it into place by hand. Fit the rod seal and wiper in the gland grooves the right way round, as a reversed seal leaks at once under pressure. Cover the rod threads and edges with a thin protective sleeve or tape as they pass through the gland. After assembly, test the cylinder first without load, then under load, and check the seal area again after a day's work.
Specifications
- Machine systemHydraulic system
- Part typeCylinder seal kit
- Machine brandHIDROMEK
- Manufacturing typeAftermarket
- Machine seriesHMK 102B, HMK 102S, HMK 105, HMK 62
No questions about this product.
%20А_УТ-00000939-220x230.jpg "Cylinder seal kit 30x60 991/00036 JCB, aftermarket")
%20А_00-00000632-220x230.jpg "Cylinder seal kit 40x70 991/10151 JCB, aftermarket")
