Joint pin 6111412M91 Terex, aftermarket

For the Terex backhoe loaders: joint pin 6111412M91, an aftermarket part.

Pins are made of steel with a hardened, ground surface, which gives wear resistance under heavy shock loads. When a pin is replaced, the ovality of the eyes is measured too: if the eyes are worn, replacing only the pin and bush will not remove the play and the eyes need repairing.

Specifications

Compatibility

According to the product card, 6111412M91 is a pin. Machines listed on the card: TX820, TX825, TX840, TX860, TX890, TX970. Fit is confirmed by the part number. Other parts are in Terex pins.

Fitting

Before the change, lower the attachment to the ground or support it securely, stop the engine and release the hydraulic pressure. Remove the locking element and drift the pin out with a suitable punch without damaging the eyes. After cleaning and checking the eye and bush, fit the new pin greased, refit the locking element and grease the joint until clean grease comes out.