- BrandTEREX
- Article6102877M2
- Machine systemHydraulic system
- Part typePin
- Machine brandTEREX
- Manufacturing typeAftermarket
- Machine seriesTX820, TX825, TX840, TX860, TX890, TX970
- Outer diameter, mm45
- Length, mm267
- All the features
For the Terex backhoe loaders: joint pin 45x267 6102877M2, an aftermarket part. According to the product card, this part is a joint pin 45x267.
Pins are made of steel with a hardened, ground surface, which gives wear resistance under heavy shock loads. When a pin is replaced, the ovality of the eyes is measured too: if the eyes are worn, replacing only the pin and bush will not remove the play and the eyes need repairing.
Specifications
| Part number | 6102877M2 |
| Production type | Aftermarket |
| Part type | Pin |
| System / group | Hydraulic system |
| Machine make | TEREX |
| Series / model | TX820, TX825, TX840, TX860, TX890, TX970 |
| Outer diameter | 45 mm |
| Length | 267 mm |
Compatibility
According to the product card, 6102877M2 is a pin. Machines listed on the card: TX820, TX825, TX840, TX860, TX890, TX970. Fit is confirmed by the part number. Other parts are in Terex pins.
Fitting
Before the change, lower the attachment to the ground or support it securely, stop the engine and release the hydraulic pressure. Remove the locking element and drift the pin out with a suitable punch without damaging the eyes. After cleaning and checking the eye and bush, fit the new pin greased, refit the locking element and grease the joint until clean grease comes out.
Specifications
- Machine systemHydraulic system
- Part typePin
- Machine brandTEREX
- Manufacturing typeAftermarket
- Machine seriesTX820, TX825, TX840, TX860, TX890, TX970
- Outer diameter, mm45
- Length, mm267
No questions about this product.
-042,%201349_УТ-00004536-220x230.jpg "Loader bucket pin 3520042M5 Terex, aftermarket")
