JCB BoomTec 4003/4005 slide pad grease, 5 kg, genuine

4003/4005

Brand
JCB
Article
4003/4005
Machine system
Oils and lubricants
Part type
Slide pad grease
Manufacturing type
Original
All the features

In stock

0,00 ₺

We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.

Check the exact specifications and compatibility with your machine with our managers.

We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.

Free delivery to the carrier of your choice, or collect your order in Istanbul.

Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Message on WhatsApp Message on Telegram Call us: +90 531 224 49 66

JCB BoomTec 4003/4005 slide pad grease, 5 kg is a genuine JCB product for the construction machines. This is JCB BoomTec telescopic boom slide grease under a JCB part number. Pack: bucket.

On machines with a telescopic boom, the inner section slides inside the outer one on slide (wear) pads. These surfaces work under heavy load with slow movement, and ordinary grease is easily wiped off here or picks up dust and turns into an abrasive paste. Slide greases have high adhesion and water resistance and often contain PTFE or solid lubricant additives. They leave a thin film on the boom section and reduce pad wear, jerky extension and squeaking.

Specifications

Manufacturer	JCB
Production type	Original
Part type	Slide pad grease
System / group	Oils and lubricants

Compatibility

According to the product card, the product code is 4003/4005. The product is chosen and used according to its purpose and the instructions on the pack. Other products are in Greases.

Use

Extend the boom fully and make the machine safe. Clean the surfaces, apply the grease thinly and evenly with a brush or spatula, then retract and extend the boom a few times.

Specifications

Machine system
Oils and lubricants
Part type
Slide pad grease
Manufacturing type
Original

Questions: 0

No questions about this product.

Useful articles 07/10/2026 23

How to Check the Oil Levels on a JCB 3CX / 4CX: Hydraulics, Engine, Gearbox and Axles

On the JCB 3CX and 4CX the hydraulic oil level is checked at the sight glass on the hydraulic tank: park the machine on level ground, lower the loader shovel to the ground, close the excavator dipper, raise the boom, crowd the bucket and stop the engine; the oil should be at or above the red mark. Other units have their own rules: the gearbox level is checked on the dipstick after the engine has idled, and the axles and hubs are checked to the bottom of the filler hole. Below are step-by-step instructions, capacities and oil types from Section 3 of the JCB service manual.

JCB 3CX / 4CX 07/10/2026 26

JCB 3CX / 4CX Routine Maintenance: Service Intervals, Lubrication, Fluids and Filters

This page covers the routine maintenance section for the JCB 3CX / 4CX backhoe loader: service intervals by hour meter reading, pre-shift checks, lubrication points, fluids and capacities, and the standard procedures for each system — engine, fuel, hydraulics, transmission, axles, brakes and electrics.