992/11300 lever grease gun, OEM

992/11300

Brand
BAUM
Article
992/11300
Machine system
Oils and lubricants
Part type
Grease gun
Manufacturing type
OEM
All the features

In stock

0,00 ₺

We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.

Check the exact specifications and compatibility with your machine with our managers.

We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.

Free delivery to the carrier of your choice, or collect your order in Istanbul.

Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Message on WhatsApp Message on Telegram Call us: +90 531 224 49 66

For the construction machines: 992/11300 lever grease gun, an OEM part made by BAUM. A lever grease gun that takes a cartridge or bulk grease.

Couplers, hoses and tubes usually screw onto the gun with a standard thread, but the thread type and size should be checked. Double-grip or locking couplers do not slip off the nipple and make the job easier. When not in use, the gun is stored upright with the coupler protected from dirt. If the gun will not deliver grease, the air is bled out and the cartridge and plunger checked.

Specifications

Manufacturer	BAUM
Production type	OEM
Part type	Grease gun
System / group	Oils and lubricants

Compatibility

According to the product card, the part number is 992/11300. Fit is confirmed by the part number or by the thread and size of the old part. The catalogue also has the genuine version of this part. Other parts are in Accessories.

Fitting

Fit the part to the gun so that it seals, using a thread seal or tape. On first use, bleed the air from the gun and check the grease flow.

Specifications

Machine system
Oils and lubricants
Part type
Grease gun
Manufacturing type
OEM

Questions: 0

No questions about this product.

Useful articles 07/10/2026 23

How to Check the Oil Levels on a JCB 3CX / 4CX: Hydraulics, Engine, Gearbox and Axles

On the JCB 3CX and 4CX the hydraulic oil level is checked at the sight glass on the hydraulic tank: park the machine on level ground, lower the loader shovel to the ground, close the excavator dipper, raise the boom, crowd the bucket and stop the engine; the oil should be at or above the red mark. Other units have their own rules: the gearbox level is checked on the dipstick after the engine has idled, and the axles and hubs are checked to the bottom of the filler hole. Below are step-by-step instructions, capacities and oil types from Section 3 of the JCB service manual.

JCB 3CX / 4CX 07/10/2026 26

JCB 3CX / 4CX Routine Maintenance: Service Intervals, Lubrication, Fluids and Filters

This page covers the routine maintenance section for the JCB 3CX / 4CX backhoe loader: service intervals by hour meter reading, pre-shift checks, lubrication points, fluids and capacities, and the standard procedures for each system — engine, fuel, hydraulics, transmission, axles, brakes and electrics.