458/20403
  • Brand
    BOYPAR
  • Article
    458/20403
  • Machine system
    Transmission
  • Part type
    Hub seal cover
  • Machine brand
    JCB
  • Manufacturing type
    Aftermarket
  • Compatibility
    JCB 3CX, 4CX
  • All the features
In stock
0.00 ₺
We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.
Check the exact specifications and compatibility with your machine with our managers.
We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.
Free delivery to the carrier of your choice, or collect your order in Istanbul.
Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Hub seal cover plate 458/20403 is an aftermarket part for the JCB 3CX and 4CX backhoe loaders.

The hub seal cover plate covers the hub seal at the axle end from outside and protects it from mud, stones and crop debris, also helping to keep the seal in its seat. If the cover bends or breaks, the seal wears quickly, oil leaks out and water and dirt get in, shortening the life of the bearings and planet gears. On machines working in mud and fields, the area around the cover is cleaned regularly.

Specifications


Part number458/20403
Production typeAftermarket
Part typeHub seal cover
System / groupTransmission
Machine makeJCB

Compatibility

According to sources, 458/20403 is the hub seal cover plate that covers the hub seal from outside. Other parts are in Reduction gears.

Fitting

The cover is chosen by part number for the axle type; sources state it is used on the front and rear hubs of JCB 3C, 3CX, 3D, 4C and 4CX and 214-217 backhoe loaders. The hub seal is usually renewed when the cover is changed; tighten the cover bolts evenly to the specified torque and check that the cover does not rub on any rotating parts. Before fitting the cover, clean the seating faces of old sealant and rust. Lubricate the seal lip with clean grease, check the hub oil level after assembly and look for leaks around the cover after the first hours of work.

Specifications

  • Machine system
    Transmission
  • Part type
    Hub seal cover
  • Machine brand
    JCB
  • Manufacturing type
    Aftermarket
  • Compatibility
    JCB 3CX, 4CX
Questions: 0
Your question:

No questions about this product.

JCB 3CX / 4CX 07/10/2026 77
JCB 3CX PD70 rear axle parts breakdown: drawings and part numbers from the JCB catalogue
This article brings together the drawings and parts lists for the PD70 rear axle of the JCB 3CX backhoe loader from the JCB parts catalogue: the complete axle, the axle arm with hub reduction and brake plates, the drive head with brake pistons, the differential and the remote breather. The example is axle 450/44530 with a 15.78:1 ratio and limited slip differential, fitted to 3CX-T machines with front wheel steering (catalogue 9812/0010, serial numbers 00960000–00989999, 01297000–01297999, 01327000–01349999, 01616000–01621599, 01705500–01709999). Part numbers shown as links open the product pages in our catalogue.
Useful articles 07/10/2026 52
JCB 3CX / 4CX Rear Axle Overheating: Causes and What to Check
The rear axle of a JCB 3CX or 4CX backhoe loader runs hotter than the front axle by design: it houses the oil-immersed service brakes, one multi-plate brake pack on each half shaft. A warm axle casing after a shift is therefore normal. It becomes a concern when the axle gets very hot after an ordinary road run, the machine feels as if it is dragging, there is a smell of burnt oil from the axle, or oil starts leaking past the seals. The usual cause is brake drag: the service brakes or the park brake are not releasing fully. Below, based on the JCB service manual, is what to check and in what order.
JCB 3CX / 4CX 07/10/2026 78
JCB 3CX / 4CX Transmission: Gearboxes, Axles, Pressures and Stall Test
Section F of the JCB service manual covers the transmission of the JCB 3C, 3CX and 4CX backhoe loaders: Synchro Shuttle SS700, Powershift PS764 and PS766 gearboxes, torque converter, front and rear axles, propshafts and oil cooler. It contains technical data, gearbox operation and electrics, pressure tests, the torque converter stall test, fault finding tables and removal procedures. This is issue 9803/3290-16 of the manual; the PDF runs to 306 pages.
Similar products
450/20403
LSD differential plate 450/20403 JCB 3CX/4CX, aftermarket
445/05107
Transmission clutch plate 445/05107 JCB 3CX/4CX, aftermarket
450/20401
LSD differential plate 450/20401 JCB 3CX/4CX, aftermarket
448/05408
Differential cross pin 448/05408 JCB, aftermarket

This site uses essential cookies (session, cart, language, currency). If you click «Accept», Google Analytics and Yandex Metrica cookies are also used for visit statistics; if you click «Decline», they are not loaded. Personal data is processed under the Turkish data protection law KVKK No. 6698. Details: Privacy and cookie policy.