- BrandJCB
- Article332/G6498
- Machine systemFuel system
- Part typeFuel hose
- Machine brandJCB
- Manufacturing typeOriginal
- All the features
Fuel hose 1937 mm 332/G6498 is a genuine JCB part for the JCB machines. According to the product card, the hose is 1937 mm long and runs from the pre-filter to the lift pump.
A fuel hose is the flexible connection carrying fuel between the tank, pre-filter, lift pump and leak-off line. Its flexibility absorbs engine vibration and movement between the cab and frame. It consists of a fuel-resistant inner layer and an outer protective cover. Over time the inner layer hardens and cracks: a hose on the suction side lets air in, so the engine starts badly or stops under load, while a hose on the pressure side leaks fuel and poses a fire hazard. Fine cracks on the hose surface show that the inner layer has aged too.
Specifications
| Part number | 332/G6498 |
| Manufacturer | JCB |
| Production type | Original |
| Part type | Fuel hose |
| System / group | Fuel system |
| Machine make | JCB |
Compatibility
According to the product card, 332/G6498 is a fuel hose. Fit is confirmed by the part number. The catalogue also has the aftermarket version of this part. Other parts are in Fuel pipes and hoses.
Fitting
Before the change, clamp the fuel lines or close the tank tap and catch the escaping fuel in a container. Push the new hose fully onto its fittings and tighten the clamps, checking the flow direction and connection points against the old hose. After assembly, bleed the system, run the engine and check the hose joints for leaks and air bubbles.
Specifications
- Machine systemFuel system
- Part typeFuel hose
- Machine brandJCB
- Manufacturing typeOriginal
No questions about this product.
