Fuel separator assembly 32/925717 JCB 3CX/4CX, genuine

For the JCB 3CX and 4CX backhoe loaders: fuel separator assembly 32/925717, a genuine JCB part. This part is the separator assembly, made up of the pre-filter housing and filter element.

How much water gets into the fuel depends on where and how the machine is fuelled: open tank caps, condensation and dirty cans are the main sources. Filling the tank at the end of every working day reduces water from overnight condensation. Check the pre-filter water bowl daily and drain it at once if it is full, collecting the fuel and water in a container so the environment is not harmed. The separator element gathers the water into droplets that settle to the bottom of the bowl.

Specifications

Compatibility

According to sources, 32/925717 and 32/925765 are fuel water separator filter assemblies used on JCB 3CX, 4CX and 5CX backhoe loaders and 926-940 rough terrain forklifts. The catalogue also has the aftermarket version (pre-filter water) and aftermarket version (assembly) of this part. Other parts are in Genuine JCB filters.

Fitting

Do not pre-fill the fuel filter, since fuel poured in from outside can reach the clean side. Record the date and engine hours in the service log, and collect the old filter and spilled fuel without harming the environment. After changing the pre-filter, check the water bowl and drain plug for leaks, and renew a cracked bowl, since air drawn in through the crack makes the engine hard to start.