Wheel stud 826/10575 JCB, aftermarket, option 2

For the JCB machines: wheel stud 826/10575, an aftermarket part. According to the product card, this part is a wheel stud.

Studs differ in thread, length and the diameter of the knurled part, which must fit tightly in the hub hole. If one stud has broken, the neighbouring ones may also have been overloaded, so all of them are checked. After the wheel is fitted, the nuts are tightened in a cross pattern to the specified torque and checked again after the first hours of work. After the wheel has been removed and refitted, the stud threads should be clean and lightly oiled.

Specifications

Compatibility

According to the product card, 826/10575 is a wheel stud. Fit is confirmed by the part number. The catalogue also has the aftermarket version of this part. Other parts are in Fasteners.

Fitting

Press the old stud out of the hub and press the new one in until the knurled part is fully seated. Do not pull the stud into place with a nut, as this damages the thread.