Centring nut 823/10041 JCB, aftermarket

Centring nut 823/10041 is an aftermarket part for the JCB machines. According to the product card, this part is a centring nut.

A nut is a threaded part that works with a bolt or stud and clamps the joint. The strength of the joint depends on the tension created in the bolt as the nut is tightened. The nut's strength grade must match the bolt, as a weaker nut may strip its thread under load. To stop nuts working loose under vibration, machines use lock nuts, self-locking nuts (with a nylon ring or deformed thread) and locking washers. Where possible, the nut and bolt are taken from the same strength grade and standard.

Specifications

Compatibility

According to the product card, 823/10041 is a nut. Fit is confirmed by the part number. Other parts are in Fasteners.

Fitting

Before fitting the nut, clean the thread of the bolt or stud and repair any damaged thread. Tighten the nut to the specified torque; self-locking nuts are usually replaced once removed. In joints with several nuts, tighten them in a cross pattern and in stages.