4089854
  • Brand
    KRAUF
  • Article
    4089854
  • Machine system
    Engine
  • Part type
    Turbocharger
  • Machine brand
    JCB
  • Manufacturing type
    Aftermarket
  • Compatibility
    Cummins
  • All the features
In stock
0,00 ₺
We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.
Check the exact specifications and compatibility with your machine with our managers.
We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.
Free delivery to the carrier of your choice, or collect your order in Istanbul.
Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Turbocharger 4089854 is an aftermarket part for the Cummins engine.

The turbine wheel is driven by exhaust energy, and the compressor wheel on the same shaft pushes air into the engine. A failing turbo shows as loss of power, black or blue smoke, whistling, oil in the intake or exhaust and shaft play. Most failures come from oil starvation, dirty oil or dust passing the air filter; these causes must be cleared before a new unit is fitted. When ordering, give the engine serial number and the data from the old turbo's label. If oil has collected in the intake and intercooler after a turbo failure, clean them out as well. Because the turbo shaft spins at very high speed, oil cleanliness directly sets bearing life. The turbo bolts to the exhaust manifold by its flange; the oil feed and drain pipes and the intake and boost hoses connect around it. The wastegate actuator limits boost pressure. The turbo is supplied new. Boost pressure and wheel sizes are matched to the engine; the wrong turbo causes power loss or excessive boost.

Specifications


Part number4089854
Production typeAftermarket
Part typeTurbocharger
System / groupEngine
Machine makeJCB

Compatibility

Other parts are in JCB Dieselmax engine.

Fitting

When fitting, check the intake hoses and clamps and clean the tract so that nothing enters the compressor. Tighten the exhaust flange with new lock nuts. The oil drain pipe must be clear, otherwise oil is forced past the turbo seals.

Specifications

  • Machine system
    Engine
  • Part type
    Turbocharger
  • Machine brand
    JCB
  • Manufacturing type
    Aftermarket
  • Compatibility
    Cummins
Questions: 0
Your question:

No questions about this product.

07/10/2026 34
JCB Dieselmax Engine in the JCB 3CX / 4CX: Builds, Technical Data and Servicing
Section K of the JCB service manual (publication 9803/3290-14) deals with the installation of the JCB Dieselmax engine in JCB 3C, 3CX and 4CX backhoe loaders. It gives the technical data for each engine build, the cold start heater electrics with their fault codes and the operation of the viscous fan coupling, together with the removal procedures for the radiator, expansion tank, fuel injection pump and the engine itself. The PDF runs to 30 pages.
Similar products
320/06157
Turbocharger 320/06157 JCB Dieselmax, aftermarket
320/09202
Main bearing set 320/09202 JCB Dieselmax standard, genuine
320/A9010
Bottom engine gasket set 320/A9010 JCB Dieselmax DE, genuine
320/09421
Piston assembly 320/09421 JCB Dieselmax DE standard, genuine

This site uses essential cookies (session, cart, language, currency). If you click «Accept», Google Analytics and Yandex Metrica cookies are also used for visit statistics; if you click «Decline», they are not loaded. Personal data is processed under the Turkish data protection law KVKK No. 6698. Details: Privacy and cookie policy.